FULL 4 AXIS CNC Controller
220 three phase power
Easy to use touch screen
Uses standard DFX Files..also Alpha Cam.
(Can also be ran Manually)
This does automatic squaring of blocks,
Group cuts, auto Horizontal Top cut is a nice feature...
Plus all the fancy stuff...
Please specify rotating table..comes with strait cart non rotary
20 Ton Rotary cart
Max Processing Size: 3000×2000×1500mm
Guide wheel distance: 500-2000mm
Diamond wire length: 14.4m
Static Worktable Size (L×W)2500×1300mm
Main Motor 15-40hp depending on your needs
Up-down synchro servo motor n.m15
Worktable walking stepper motor n.m20
Guide wheel rotating stepper motor n.m4
Hydraulic Tension-er force range
Worktable bearing weight 20 Ton
Fly wheel diameter 60in Dia-up to-78in Dia depending on your block or boulder cutting needs
Guide wheel diameter 220mm
Wire-cutting speed: 2000
(360° rotating worktable size
2500mm1600mm ADDED COST)
Granite:(Depends on stone hardness.)m³/h
Weight kg: 5000
This wire saw adopts CNC control, Four-Axis linkage, which can process the circular stone slab, roman column,numeral, letters, characters and other designed shapes.
1. Heavy load bearing structure, four orbits on each upright column, adjusted the balance by the rollers, with less friction and higher precision.
2.The left and right frame achieve synchronized lifting by steering equipment on the upper frame. The lifting accuracy is increased by the combination of lead screw and double nuts.
3. Cantilever part, the lead screw and pole adjust the distance of guide wheel，guide wheel is controlled by CNC,
to make the diamond wire cutting direction coincide, Servo Drive reducer controls the guide wheel rotating angle.
4. Automatic alarm and memory function if wire has broken.
5. Aluminum wheel diameter is 1600mm.One fly wheel slide through sheave, oil pump control Diamond wire tension.
Disclaimer: All the information needs to be verified by the manufacturer.