2005 Park Industries Velocity with 4500Hrs
Horizontal multi-head Edge Polisher easily shapes & polishes monolithic and laminated edges in a single-pass.
Preprogrammed profiles for a variety of shapes make setup fast and simple; profiles include flat edge, flat edge with radius top & bottom, bullnose, half-bullnose, demi-bullnose, and other convex shapes for 2 cm (3/4") to 6 cm (2-3/8") stone thickness.
The "Velocity" can handle pieces up to 12' long x 12' wide (with support conveyor).
Control: Easy-to-use, user-friendly color touch-screen; preprogrammed operator parameters including profile configurations for varying stone thicknesses, conveyor speed, spindle motor selection, spindle stagger & holddown timing.
Additional controls: User-friendly help screens, on-screen diagnostics, maintenance schedule management, setup screens, and more.
Spindles: (1) Back gauging spindle, (2) pre-grinding spindles for waste material removal, (1) Servo driven shaping spindle, (6) polishing spindles, (2) chamfer spindles.
Center water feed on all spindles except Servo shaping spindle; internal air purge on all spindles to prevent bearing and seal contamination.
Dimensions: 31'-2" Long x 8-3/4' wide x 7'-10" high overall dimensions (including input, output, and swing-out conveyors); approx. weight of 16,000 Lbs.
Pneumatic holddowns: (19) 2" Bore x 4" stroke Heavy Duty triple-rod air cylinders with non-marring Urethane rollers in stainless steel yokes; built-in skew to minimize stone shifting.
Powered belt conveyor drive, 2' wide x 17' long non-slip, non-marring conveyor belt; 1 HP duty AC motor with variable frequency drive speed control (2 - 40 IPM).
Infeed/Outfeed Conveyors - Infeed Conveyor: 72" Long x 31" wide with "all way" rollers and non-marring guide fence. - Outfeed Conveyor: 72" Long x 31" wide, "all way" rollers; swing-out support conveyor provides overhanging stone support from 9" - 36" from outside edge of conveyor belt.
SPECIFICATIONS AS PER MANUFACTURER'S WEB SITE WHICH CANNOT BE GUARANTEED FOR THIS 2006 MODEL.
Owner Comments: Good working condition. 2 motors we don't use because of over polish. They don't work.