Diamond Wire Saw
Single Diamond Wire Machine 4000/2200
Serial Number 192
Manufacturer Bideseimpianti (merged with Breton)
Meter hours 45,536
This machine has been in a heated building its entire operation, never exposed to the elements.
4 hours of operation training is available at our site.
Operational Manual, Electrical Diagrams are included.
Machine foot print installed
Height 18' 10 3/8"
Length 26' 8" rail with single cart
Width 27' 9 ½"
Power supply 400 V, 50 Hz; comes with transformer for 480 V, 60 Hz to 400 V, 50 Hz
Water supply required 40 l/min @ 2to 3 bar
Compress air required
Main motor size 34 Hp
Cut size 7' 6" X 11' 9 ¾" (with 350 mm guide pulleys)
Weight 5 tons;
Wire length 19.05 meters
Drive & idler 2 each at 1,440 mm diameter
Tension & idler 2 each at 1,000 mm diameter
Guide idlers 2 each at 350 mm diameter
Equipped with slab shifter separate slabs while in automatic cutting
Trolley of 30 ton capacity with turn-table
Compressed air tension with automated wire tension adjustment for wire bow value
Suited for unattended overnight operation for cutting blocks into slabs of various thicknesses greater than 2 cm
1 spare tension pulley with spindle (new)
Spare lead nuts (2 ea new)
Terms cash, as is/where is/no warranties condition with removal/disassembly by buyer at plant location; power is on the machine and it is in operating condition. This machine is available for inspection. The machine will be available for disassembly after March 20, 2016.
There is a 25 ton overhead crane available for disassembly and loading.