|
First pictures shows catalogue picture for illustrative purposes, machine has 1118 Hours on it. The Following specifications are taken from the manufacturer's web site and cannot be guaranteed for this 2006 MODEL: The multiple-head edge-polishing machine, "TAURUS 02", is a fully automatic and easy-to-operate machine which facilitates the manufacturing of kitchen countertops thanks lo its extreme versatility. "TAURUS 02" has been tested in our factory by undergoing a complete field test of different processes and programs for various profiles and manufacturing cycles. Made of hard, durable steel the "TAURUS 02" has a strong structure that, after being precisely gauged in ali its parts, is electro-welded, assembled, sandblasted and protected by special systems of painting. The edge-polishing machine "TAURUS 02" is delivered by all protections conforming the regulations. Main characteristics: ï Precutting unit with automatic adjustment, provided with special long-lasting cutting blades ï A 4 kW calibrating unit and/or horizontal continuous kerf cuts on edge of slabs (option: kerf slit-cuts for slab work reinforcements on walls and floors) ï Fiat profiling wheel with automatic adjustment (option: programmed stop for profiling wheel for kitchen counter-tops) ï 6-unit bridge of spindles with self-centering system (one profiling wheel and five polishing heads) ï Main water supply delivered from the center of every spindle and further water supply located above bridge unit ï "Floating-system" for granite polishing on flat and inclined edges ï Unit for chamfering and polishing the bevels (two lower and two upper units) ï 4 kW cutting unit for different purposes able lo cut back-splashes; lower, upper and inclined cutting (option: precision cuts for reinforcement bars) ï The conveyor belt slides on 12 mm. stainless steel gauging plates and it is guided on its lower side by a double self-greasing patented belt which allows the processing of various operations without opposing bar ï Ali protections and main electric panel casing are made of stainless steel ï Ali moving parts of the machine are greased by an automatic self acting greasing unit ï "PLC by SIEMENS" which controls every spindle in all manufacturing operations, for example: partial polishing of the edge; diameter selection of the abrasive and possibility of polishing irregular shapes.
|
Stone Machinery
Machines
