STAR "V" MACHINERY, Model SCG-120 UniStar? Universal V-Groover is the most versatile v-groover to date. Designed for linear and cross v-grooving within a 10' length parameter, but without any width limitations. For example a 5' x 10' board or a 10' x 36" solid surface sheet material can be v-grooved anywhere over its entire surface. Cutter head travels over the stationary material, which makes this machine most suitable for very delicate surfaces. Even angled cuts for a pyramid shaped pedestal can be accomplished. Designed to work with solid surface, wood, laminated or veneered MDF or particleboard and other man made materials. Exchange the v-groove tool with a profile cutter head to perform shaping operations or decorative panel v-grooving tasks for wall boards etc. Machine can also function as a 10? linear or crosscut saw, when a scoring blade is not needed. STAR "V" MACHINERY, Model SCG-120 UniStar? V-Groover Technical Specifications: (1) or (2) Spindle(s) with 12 HP-3,600 RPM motor each, 120" max. linear cut capacity and unlimited cross cut capacity, 30 mm spindle x 3" clamping length with 8mm single keyway, 9-1/2" max. diameter cutter head, ¼" to 1-1/8" material thickness, carriage cross travel powered by a variable speed DC gear drive with timing belt, head up & down movement via pneumatic cylinder on linear rail & bearings, depth fine adjustment with special threaded adjustable unit and dial indicator, material hold down via unique pneumatic bar system with individual, adjustable pneumatic press down cylinders. Complete with: Safety and cutter guards, limit switch, 120" long linear, motorized fence with 5' stroke and digital read out, cross cut fence with 2-piece manual stop and mechanical read out, attached or separate automatic linear tape applicator, automatic motor brake, emergency safety line across the cutting length of the machine, 43" x 188" main table top covered with Phenolic, (2) side tables 20" x 57" each with high- precision steel rollers and control panel. Heavy duty welded steel frame construction, 8" x 8" special construction, heat treated and precision machined overhead beam. Machine base equipped with anti-vibration, anti-noise leveling pads, dust collection requirements 700 CFM per head, 3" diameter dust chute on cutter guard, compressed air requirements 80 PSI, approx. 7,500 Lbs. PICTURE SHOWS NEW MACHINE, WAITING FOR PICTURES OF ACTUAL MACHINE.
|