This is a great running saw. We replaced the motor and arbor in november 2011 with a new advanced VEM ARBOR MOTOR ME105/6L/240/480V-3 PHASE-60HZ-6 POLE
Machine comes with hydraulic tilt table, tilting saw head, laser and the shipping stands.
Already disassembled, so no dismantling charges, ready to ship.
The following specifications and control features are taken from the manufacturer's web site for a 2009 model and cannot be guaranteed to be acurate for a 2005 model.
Maximum sawing depth with diamond blades designed for granite: 2-1/4" with 14" blade, 3-1/4" with 16" blade, 6-3/4" with 24" blade
Maximum tool width: 1-1/2"
Blade housing built to accept 24" blade (maximum)
Blade center hole to fit a 50mm arbor shaft
Blade mounted on left side of bridge as viewed by operator
Blade flange size: 8-1/2"
Main motor size: 20 HP AC, 1150 RPM across the line starters, TEFC motor
Main drive system: Direct drive
Bridge miter with portable digital angle indicator (accurate to 0.1 degree): 0-47 degree manual position and lock
Track type wire/hose distribution system for cross-head travel
Cross-head travel distance: 144" travel provides 136" plunge cut in 4 cm (1-1/2") thick material with 14" blade
Cross-head travel speed: 1-50 FPM, variable-speed AC drive, TEFC motor
Cross-head travel drive: Rack & pinion
Cross-head travel guides: Dual round linear ways with precision slide bearings and automatic oil system
Raise and lower: 12"
Raise and lower drive: variable-speed AC drive; screw driven
Fixed blade cover: includes ball valve and water hose and water forks for water application to blade
Standard gantry rails: 198" in length, 11' 6" cutting area
Gantry drive speed: 1-20 FPM, automatic air brakes
Joystick or touch-screen gantry controls
3 pre-set move single-cut widths and added +/- direction toggle
Improved procedure for changing cut-modes
10 auto-mode programmable cut widths
Two storable preset X axis soft limits
Programmable žroddingÓ soft limit to Z axis
External pushbutton arbor control switches
New pendant control design
New coiled pendant cable
Simplified screen navigation and improved labeling
Merged manual and semi-automatic functions into one function for making single cuts
Adopted X-Y-Z coordinates to describe direction of movement
Improved touch-screen interface with fast refresh speed
Y axis joystick has center lock to prevent accidental movement