|
This machine is prepared for the retrofit installation of a second v-grooving head (approx. $6,500 plus installation)). STAR V MACHINERY'S Model SLG-1LB Linear V-Groover is designed to v-groove various wood materials, wood composites or plastics such as solid surface. V-Folds to create a build-up front edge, cove back splash profile, scribe strip, dado for back panel, double edge shelving etc. Other v-groove angles besides the standard 90° can easily be employed. The tape, which acts as the hinge for miter folding, is applied automatically and cut to length. The feeder belt moves the material over the high-precision, stainless steel roller table, which minimizes friction and reduces or eliminates marring of the material. The v-groove is being applied from above. Both linear as well as cross cuts up to 14-16" away from the fixed fence are possible. Set-up controls are manual. STAR V MACHINERY, Model SLG-1LB Linear V-Groover (1) Spindle with 10 HP-3,600 RPM motor, 14" throat capacity 30 mm spindle x 3" clamping length with 8mm single keyway, 9-1/2" max. diameter cutter head, ¼" to 1-1/8" material thickness, board width from 6" min. to no max. width restrictions, min. board length approx. 20", unlimited length of part when cross grooving with optional omni-directional roller ball table, 6" diameter solid aluminum reference roller in cutting area. Grooving head is mounted on heavy duty overhead beam of 6" x 8" x ½" thick, heat-treated steel, head side movement via hand crank on linear rail & bearings on precision machined beam; and ACME thread screw, digital readout scale pneumatic lock of head positioning, head height adjustment on linear rail & bearings, manual fine tuning via ACME screw with dial indicator gauge (inch or metric scale) with o backlash. DC high ratio gear drive unit for variable feed rate from 0 to 40 FPM, double width feeder belt moves work piece on high precision, stainless steel rollers, raising & lowering of feeder mechanism for optimum friction via manual gear drive. Machine base equipped with anti-vibration, anti-noise leveling pads. Complete with: Fixed fence, cleaning brush, cutter guard and emergency shut-off line along the machine bed, automatic tape applicator with 14" tape diameter capacity and all controls. Dust collection requirements 700 CFM, 3" diameter dust chute on cutter guard, compressed air requirements 80 PSI Also comes with a used 4+4 wing 90 degree diamond cutter and a roll of tape. Inquire about the other carbide and diamond cutters available at extra charge.
|
Air Compressors
Block Stone Profiling Machinery
Machines
