Have Questions About A Machine?
Call Bron (541) 892-8555
Email: BronHenry@FastMail.com
    Home | 3/28/24 8:17 PM
 
 
 


NOTE: This Machine is SOLD. Click Here to View Our Full Selection of Used Machinery - Stone Machinery - Bridge Saws Machines or Contact Us If You Are Interested in a Similar Machine.
Machine ID 2793 Year
Category Used Machinery - Stone Machinery - Bridge Saws Condition Currently in use
Type Large Bridge Saw Region Southwest US
Manufacturer PARK Sale Price $34900.00
Model JAGUAR C300 HP & Max Diamond Wheel Diameter Inches 25HP & 28
Photo Slideshow
Description Machine is programmable for step-cutting, etc.

Customer is consolidating from two facilities to one larger facility and does not need this saw anymore as they have new equipment coming in. The saw is currently under power (as of 5/24/12) and will only be under power until the move in approximately two weeks.

Specs:

Machine Capabilities:

Maximum sawing depth: 9" with 28" blade, 2 1/2" with 14" blade

Blade Specs:

Maximum tool width: 1 1/2"

Blade housing built to accept 14" - 28" blade

Blade center hole to fit a 50mm arbor shaft

Blade flange size: 8"

Control Package C3000

Programmable for automatic operation

Automatic step cut with final pass

Digital input of variable next cut locations with kerf adder

10 1/2" touch screen for all powered movements

Main motor amp meter with over amp

Amp following

Water flow safety

Water control solenoid

Hour meter with clock

Laser light

Hand held pendant for all directional control with e-stop

Machine Specifications:

Main motor size: 25 HP across the line starters, TEFC motor

Main drive system: belt drive

Arbor: Heavy duty spiral bevel gears in tapered roller bearings

Cross head travel speed: 1-30 FPM, variable speed AC drive, TEFC motor

Cross head travel distance: 146" travel provides 130" plunge cut in 1 1/2" thick material with 28" blade

Cross head travel drive: rack and pinion

Cross head travel guides: Dual round linear ways with precision slide bearings

Raise and lower: 16"

Raise and lower drive: variable speed ball screw with brake for precision positioning

Gantry: 186" long rails, 10' cutting area (front to back), gantry drive speed: 1-20 FPM, automatic air brakes

Water control curtain

Machine Weight and Dimensions:

Weight: 6,000 pounds

Installed dimensions: 16' 1" long x 22' wide x 9' 11 1/2" high

Machine Requirements:

Electrical power at machine: 220 volt (+/- 10%), 3 phase, 60 Hz, 100 amps required

Air supply at machine: 3 SCFM volume, 100 PSI pressure, free of oil, water and grit larger than 25 micron

Water supply at machine: 3-14 GPM (see blade supplier) (3/4" water line)

Heavy Duty 6' x 10' turntable with 3 ton capacity and 1,500 lb. hydraulic tilt capability, 360 degreee manual rotation with hand brake for any stop location and 0,45,90,

135, and 180 degree detents for quick preset alignments.

Machine is available for inspection if neccessary.

Machine will be sold as is / where is and implies no warranties.

Buyer responsible for tear down, shipping, rigging and installation (quote can be provided upon request)

Subject to prior sale.


Dealer/Seller Contact Information
Contact Bron Henry, Product Manager
Company Selective Machinery, Inc.
Address 17434 Palamino Lake Dr
Dade City Florida 33523
Phone (541) 892-8555
Email bronhenry@fastmail.com

Related Machines (Used Machinery - Stone Machinery - Bridge Saws)
 
(4462) 2007 GMM - Toted 39 -   (4461) 2005 Park Industries - Sierra - Bridge Saw
 
(4460) 2007 Julan Machinery - SQC-450 - Bridge Saw W/Tilting Rotating Table   (4457) 2007 Emmedue - Moon 3000 - Rail saw
 
(4448) 2013 Matrix - Triton AutoCut - Bridge Saw W/Tilting Rotating Table & Programmable Cut   (4443) 2011 Matrix - Triton AutoCut - Bridge Saw W/Tilting Rotating Table & Programmable Cut
 
(4413) 2013 Zonato - FPZ500 - 3 Axis with tilting head and tilting rotating manual table   (4391) 2007 Jmm - B300 - Bridge saw w/ rotating and tilt table
 
(4389) 2006 CMS Brembana - Flexa 625 -   (4388) 2007 Sawing Systems Inc. - Marquee - Bridge Saw W/ Miter Rotating & Tilt Table