Have Questions About A Machine?
Call Bron (541) 892-8555
Email: BronHenry@FastMail.com
    Home | 4/25/24 12:21 PM
 
 
 


NOTE: This Machine is SOLD. Click Here to View Our Full Selection of Used Machinery - Stone Machinery - CNC Machining Centers Machines or Contact Us If You Are Interested in a Similar Machine.
Machine ID 2197 Year 2008
Category Used Machinery - Stone Machinery - CNC Machining Centers Condition Very good
Type CNC Machining Center w/ATC & Overhead Laser Region Midwest US
Manufacturer Northwood Sale Price $128500.00 $88500.00 (Retails for $243655.00)
Model NW 138 EDS    
Photo Slideshow
Description Reduced by $40,000!

Machine was installed in June of 2008. Hours on the machine are currently 4302. Machine is under power and can be inspected in operation. Comes with (12) vacuum cups and overhead laser projection system.

Model

NW-138EDS

Control System

GE Fanuc 0i with integrated PC

Axes

4 linear axes, 3 horizontal and 1 vertical

Independently Zoned Centralized Grease Lubrication

Axes Travel

Gantry width - 168"

Gantry depth - 100"

Vertical - 14"

Work Table

156îX 96î

Router

One 15KW(S3) Northwood/GE Fanuc EDSpindle (Extreme Duty Spindle) with SK40

chuck

Vacuum

5 hp Vacuum system

Software

StoneVisionô

AlphaCAMÆ

Machine Tolerances

Unidirectional Positioning Repeatability = +/- 0.0003"

Unidirectional Positioning Accuracy = +/- 0.0008"

Machine Quotation 3

NW-138EDS

Machine Quotation 4

Machine Description

Construction

The machine construction consists of a tubular steel weldment skirted with steel plating.

Extremely heavy-duty construction throughout insures machine stability and accuracy.

Control System

G.E. Fanuc 0i Control with fiber-optic integrated PC Features:

WindowsÆ Operating System Traverse override

Program restart Network ready

Background editing Full function handheld (MPG)

10.4î Color LCD Optional block skip

Run hour/Parts count display Current position display

Feed rate override Cutter compensation type C

Spindle override Absolute/Incremental

3.5î floppy drive/CD ROM programming

Tool offset memory C Work coordinate system

Tool length compensation Look ahead control

Inch/Metric capability Non-programmable mirror

Alarm/Operator message display image

Actual feed rate display Tool length measurement

Custom macro B 99 tool offsets

Dwell (G4) Bell-shaped

Helical interpolation acceleration/deceleration

Feed rate clamp by circular radius Memory (RAM) 128MB

Touch screen control panel I/O Port PCMCIA Card port

40GB Hard drive (Type I/II)

Two USB ports Serial port 1 ñ 1 port

Full keyboard port Serial port 2 ñ 1 port

(PS/2 compatible) Connection with CNC controller

Mouse port (PS/2 compatible) (HSSB)

One parallel port Part program storage

DNC capability (320M/128KB)

Controller keyboard Linear/Circular interpolation

Simultaneous 4 axis control MDI operation

Remote machine control, cycle stop/start and vacuum on/off controls located on the

machine base, one set of controls is supplied for each vacuum port.

The standard machine control location is on the left (when facing the machine). Right

placement can be specified at the time of machine order at no additional charge (or

within seven (7) days thereafter). Any changes made after this period are subject to

additional up-charges.

Drive System

The machine drive system consists of closed loop AC servomotors powering precisionground

ball screws and ball nuts. All ball screws are totally enclosed by neoprene

bellows. Horizontal axes utilize 40 mm diameter ball screws for speeds up to 2126 IPM

while the vertical axis uses a 25 mm diameter ball screw for a maximum speed of 500

IPM.

Machine Quotation 5

Independently Zoned Centralized Grease Lubrication for X, Y, and Z axes (axis travel is

automatically timed via CNC control with password protected security).

Work Table

Each machine work table consists of a 1.5" thick cast aluminum tooling plate machined to

precision flatness.

Router

15KW(S3) high torque Northwood/GE Fanuc EDSpindle (Extreme Duty Spindle).

1 to 8,500 RPM, grease lubricated precision bearings.

GE Fanuc Spindle directly linked with GE Fanuc machine control.

Router Accessories

SK40 automatic tool changer rack, safety device for automatic fault detection, maximum

tool diameter of 6î and a maximum tool length of 6".

Programmable control of the router RPM.

Tooling and Pod Accessories

SK-40 tool holders

Standard part locators

Square Blick pods

Remote manifolds

Machine Quotation 6

Vacuum System

The machine vacuum system consists of a 5 hp vacuum pump with valving and Remote

Vacuum Manifolds to direct vacuum to part locators and pods.

Software

StoneVisionô

AlphaCAMÆ

Safety and Maintenance

The machine operator is protected by a series of safety features including a remote

emergency stop, axis over-travel detection and tool and vacuum failure detection. All

electrical components are housed in a sealed, air-conditioned cabinet to prevent dust


Dealer/Seller Contact Information
Contact Bron Henry, Product Manager
Company Selective Machinery, Inc.
Address 17434 Palamino Lake Dr
Dade City Florida 33523
Phone (541) 892-8555
Email bronhenry@fastmail.com

Related Machines (Used Machinery - Stone Machinery - CNC Machining Centers)
 
(4479) 2019 Thibaut - T109 - CNC Machining Center   (4447) 2000 intermac - master stone 4000 -
 
(4436) 2021 Breton - Contourbreton NC 300K26 EVO - 4 Axis Profiling CNC Stone Center   (4433) 2002 Bavelloni - Egar 315-4 -
 
(4415) 2015 POSEIDON - Guardian 3 SX -   (4382) 2006 Park - Destiny -
 
(4356) 2010 Park Industries - Vektor - 3axis CNC Machinery Center W/ Dual Table   (4320) 2013 Rye Corp - Fab King -
 
(4263) 2006 Denver - Quota Tech - CNC Machining Center   (4254) 2012 Breton - NC260K Contour Robocup - CNC Machining Center