This machine is in excellent condition, with less than 100 hours on the hour meter.. The main and auxiliary spindles are in excellent shape. The machine includes Park benches and some tooling. The machine is under power and can be seen in action upon request. The Following specifications are taken from the manufacturer's web site of a 2010 machine, which cannot be guaranteed for this 2005 model.: Dual Spindles: Main spindle: 5 HP at 400 to 3500 RPM Auxiliary spindle: 3 HP at 1,750 to 9,950 RPM Center water feed, both spindles Vertical travel: 6", both spindles Head pressure: pneumatic with adjustable precision regulator Machine Capabilities: 360-degree rotation for multiple work stations Face polishing capacity: 8' 6" x 2' 2" (102" x 26") Edge shaping capacity: 11' 6" x 2' 2" (138" x 26") Coring: Undermount sink processing Drainboard cutting and polishing Sink cutout Machine requirements: Air supply at machine:2 SCFM continous volume, 100 PSI pressure, free of oil, water and grit larger than 25 microns (3/8" I.D.air line) Water supply at machine:5 GPM, 50 PSI, filtered to m5 microns (1/2" I.D. water line with clean, fresh water) Weight 2,200 Lbs
|