ZAKI BRIDGE SAW Is ideal for limited floor space. Some special features, like user-friendly interface,versatility and possibility to customize every single detail, makes the ZAKI bridge saw the right machine for every workshop. It is constructed with a strong single tube steel bridge that moves on two H shaped steel rails 3800 mm long, by means of oil bath submerged rollers protected with stainless steel covers. Itís equipped with a 15 HP (11 KW) disk motor that moves on the bridge by means of a sliding support on reinforced hardened steel guides and precision ball-driven runner blocks with automatic lubrication. The movement of the bridge for the different positions is made by a manual handwheel that can be locked. To assure the accuracy in cutting, the machine is equipped with one digital display that shows both the vertical and the horizontal position with a 1/10 mm accuracy.The vertical movement is performed by an endless screw with endless cast iron nut, driven by electric gearbox with double speed motor. The main motor moves up and down on two chromed round tubes ÿ 80 mm that slides on bronze bushes. The maximum cutting sizes are 3200x3200mm. All movements, unless bridge movement on the rails, are electric and driven by electronic inverters that keep a regular and homogeneous movement, and allow speed adjustment from 0 up to the maximum. The machine is complete with a heavy duty milled steel bench 1,700x 3,000 mm that can be manually rotated on a bearing disc ÿ 800 mm with manual locking at 0ƒ and 90ƒ. All the controls of the machine are situated in a panel beside the working bench. A remote control with all main commands is also provided to allow maximum flexibility of operation. The electric system of the machine is made with Siemens components and in according to international standards. Technical Specifications /overall dimensions Length: 6000 mm Blade motor power: 11 KW (15 HP) 4000 mm Blade rotation per minute (rpm) 1450 g/1' 2600 mm Up and down motor power: 0,75 KW (1 HP) Beam length: 3800 mm Left and right motor power: 0,75 KW (1 HP) Total weight: 2800 Kg Bridge back and forth motor power: 0,55 KW (0,75 HP) Maximum cutting sizes: 3200×3200 mm Standard cover for blade ÿ : 500 mm Head manual tilting to: NO Maximum blade diameter: 600mm Standard voltage and cycles: 380 V / 50 Hz Maximum cutting thickness with ÿ 800mm: 21 cm Water consumption: 18 L/min Vertical stroke: 400 mm Bench measures with side shelves: 1700×3000 mm
|